Toilet Repair & Installation in Boulder, Colorado

Almost always the flapper or the fill valve. A worn flapper lets water seep from tank to bowl until the fill valve tops it up again; a failed fill valve never shuts off. Both are inexpensive parts — the cost is mostly the visit.

Water at the base normally means the wax ring seal has failed or the closet flange is broken. That is not a cosmetic issue: waste water is reaching the subfloor. It needs the fixture pulled, not caulked over.

If the tank internals are the problem, repair is inexpensive and sensible. If the fixture is cracked, chronically weak-flushing, or a pre-1994 high-volume model, replacement usually makes more sense on both water use and reliability.

Permit requirements around Boulder are set locally rather than statewide. As a rule, water heater replacement, gas work, sewer laterals and repiping are permitted work, while a like-for-like faucet or disposal swap usually is not. A licensed contractor pulls the permit — if one offers to skip it, that is the signal to stop.

Requests route around the clock, but most contractors price after-hours work differently. Ask for the after-hours rate and a committed arrival window before agreeing to a dispatch.

Three things: where the water or problem is showing, whether the supply is shut off, and the property type — slab, crawl space or basement. With those, a pro covering Boulder can triage the urgency and bring the right parts.

Line by line against scope: what is included, what is excluded, who pulls the permit, and whether haul-away and restoration are inside the number. The cost guides on this site list published third-party ranges so any quote can be sanity-checked.

The licensed contractor pulls the permit — never the homeowner. If a contractor proposes skipping a required permit, treat that as the signal to stop and verify the licence.