Answer up front

Published third-party data puts backflow in the 30–300 dollar range nationally — Testing itself is a short visit with a modest fee, and the number only grows when the device fails and has to be rebuilt or replaced. Every contractor prices independently, so treat that as a sanity check on a quote rather than a quote itself.

Cost ranges reported by third parties — reported ranges for backflow in Colorado

Reported cost ranges, 2026. Ranges are published third-party figures, not quotes.
JobReported rangeWhat pushes it higher
Annual test on one device$30–$300Device size, an awkward location and a report the water authority requires filed.
Reported per-test fee, annual programme$70–$90Several devices on one site cost less per unit than a single-device visit.
Published outer bounds per device$25–$350Large-diameter assemblies on irrigation and fire lines sit at the top.
Certified tester labour, per hour$75–$150Travel, gauge calibration records and time spent isolating supply to test.
Minor repair to an existing device$50–$100Rebuild kits for a failed check or relief valve, fitted at the same visit.
Preventer installation, whole job$135–$1,100Pipe size, a pit or enclosure, and thermal protection in freezing climates.
Replacement device installed$200–$1,000Reduced-pressure assemblies on larger lines cost several times a hose-bib device.

Not a quote. These are third-party reported ranges, sourced from HomeGuide, "How Much Does Backflow Testing Cost? (2026)", homeguide.com/costs/backflow-testing-cost, fetched 2026-08-11 · Angi, "How Much Does Sewer Backflow Preventer Installation Cost? [2026 Data]", angi.com/articles/how-much-does-backflow-preventer-installation-cost.htm, fetched 2026-08-11. Only a licensed contractor who has seen the job can price it.

What moves the number — the 5 factors that change the number

Pricing is set independently by each contractor, so this page lists what moves the number rather than a figure.

  1. 01

    Number and size of assemblies on the property

  2. 02

    Whether a rebuild kit or full replacement is needed after a failure

  3. 03

    Access and whether the assembly is in a vault

  4. 04

    Purveyor filing fees

  5. 05

    Whether after-hours isolation is required for a commercial tenant

Symptoms and triggers — is backflow testing actually the fix?

Paying for the wrong job is the most expensive mistake here. These are the signs that point to backflow rather than something else.

  • Annual test notice received from the water purveyor
  • New irrigation system, boiler or fire line commissioning
  • A previous test failed and repair is required
  • Discoloured water after an irrigation cycle
  • Commercial tenant improvement requiring compliance sign-off

What the work involves — so a quote can be read line by line

  1. The assembly type, size and serial number are recorded
  2. Water is temporarily isolated for the test sequence
  3. Differential pressure and check valve performance are measured
  4. Failed assemblies are rebuilt or replaced
  5. The report is filed with the water purveyor by the certified tester

Backflow cost by city in Colorado

Labour rates, permit fees and travel distance all differ across Colorado, which is why the same job is not the same number in every market.

Colorado markets with a dedicated backflow page
CityCountyPermit authority

Before anyone touches a pipe

Verify the licence. It takes two minutes.

  • Who licenses the work: State Plumbing Board, Colorado Division of Professions and Occupations (DORA) together with the local jurisdiction.
  • Who pulls the permit: the licensed contractor, never the homeowner.
  • What to ask for: the licence number, the registered name behind it, and an insurance certificate issued to the property address.
Check a licence numberColorado State Plumbing Board Colorado licensing in full
Chrome faucet with running water
Independent licensed professionals

How to avoid overpaying for backflow

  • Get the scope in writing before the number: what is being replaced, what is being repaired, what is being left alone.
  • Ask whether the price is flat-rate or time-and-materials, and what the diagnostic charge covers.
  • Ask whether the permit and inspection fee is inside or outside the figure.
  • Ask what happens if the job opens up and turns out to be larger — get the change-order rule up front.
  • Confirm the warranty term on parts and on labour separately.
  • Verify the licence number on the Colorado State Plumbing Board register before any work starts.

Answers first

Frequently asked — backflow cost in Colorado

Why do I have to test my backflow preventer every year?

Because the checks inside it are mechanical and fail silently. Water purveyors mandate annual testing to protect the public supply from cross-contamination, and the requirement sits with the property owner.

What happens if I fail the test?

The assembly is rebuilt or replaced and retested. Purveyors typically give a short correction window, after which service can be interrupted — so do not sit on a failure notice.

Who can legally test my backflow assembly?

Only a tester holding the certification your water purveyor recognises, using calibrated gauges. Ask for the certification number and the gauge calibration date.

Does PlumberColorado charge homeowners anything?

No. PlumberColorado may be compensated by a partner when a homeowner connects with a professional through the site. That never changes what the contractor charges for the job.

Does calling create any obligation to hire?

None. A call or a callback request is a conversation, not a contract. Scope, timing and price are only agreed if you decide to proceed with the professional handling Colorado.

Are night and weekend calls handled differently in Colorado?

Requests route around the clock, but most contractors price after-hours work differently. Ask for the after-hours rate and a committed arrival window before agreeing to a dispatch.

What information speeds up a backflow callback?

Three things: where the water or problem is showing, whether the supply is shut off, and the property type — slab, crawl space or basement. With those, a pro covering Colorado can triage the urgency and bring the right parts.

How should a backflow quote be compared?

Line by line against scope: what is included, what is excluded, who pulls the permit, and whether haul-away and restoration are inside the number. The cost guides on this site list published third-party ranges so any quote can be sanity-checked.

Get connected

Backflow in Colorado

The form takes half a minute. It routes to an independent licensed pro covering Colorado; everything else — scope, timing, price — you agree with them directly, licence verified first.

  • Requests handled around the clock
  • An independent licensed pro calls you back
  • No obligation to hire

Prefer a call back?

Takes 30 seconds — an independent licensed pro calls you back.

Records for this request are provided electronically; a paper copy is free on request and the agreement can be withdrawn at any time — electronic records notice.

Submitting without the box still sends the request. PlumberColorado is a referral service, not a plumbing contractor. Stop contact any time